DIY Custom Rides
SKU: RAM-15455G-1922-RAM-DOR-FLMS-PUR
Only 14 left!
Fits
2019-2024 RAM 1500, 2500, 3500
Including:
Big Horn, Laramie, Limited, Limited Longhorn, Limited Elite, Rebel
PURPLE FLAMES
SET
of 2 FOR LEFT AND RIGHT
***EMBLEM OVERLAY
DECALS ONLY*** ***NO EMBLEM
INCLUDED***
Will
Work ONLY with FACTORY RAM Emblems
GO FAST FLAMES!! A touch of Fire is all it takes to release the inner Demon in your RAM 1500. You'll swear you can feel the heat from these Purple Flame inlays. They say where there's smoke there's fire and we all know how much smoke comes from the back tires of a RAM... might as well show a little Fire-On-The-Side as you pass them by.
-
MOPAR Officially Licensed Product ensures
OEM quality fit and finish
-
MADE WITH PREMIUM VEHICLE WRAP … DIY Custom manufactures ALL Motorsports
Graphics in house. These are the HIGHEST QUALITY GRAPHICS available on the
market today!
WE WILL NEVER USE ORACAL 651… or any
other “budget” sign making material. Today’s
vehicles are expensive with advanced finishes.
Avery Dennison 1105RS and 3M
IJ180 are specifically engineered for years of SAFE use on ALL car, truck and
SUV surfaces.
-
ALL PRINTED GRAPHICS ARE LAMINATED with a
second layer of “Optically Clear” vinyl to protect your decals from the sun’s powerful
UV rays. DIY Custom graphics WILL NOT
FADE.
-
ALL GRAPHICS feature
"Air Release Channels" for easy, bubble-free installation.
-
DRY INSTALLATION ONLY No need for soapy
water or expensive sprays. Any bubbles or air pockets are easily removed by
simply working them to the edges of the vinyl. Bubbles follow the
"Air Release Channels" and that leaves you with a perfect
installation.
-
NO MESSY CLEAN UP
-
NO TOOLS NEEDED Easy
to follow FULL COLOR instructions are included
.Avery 1105RS Premium Cast Vinyl Wrap with Avery 1360Z Gloss Overlaminate
All products are shipped within 2 business days via USPS First Class Package with Tracking. Shipping is FREE for addresses in the lower 48 US States. International shipping and shipping to Alaska and Hawaii use calculated rates.
Installation Instructions
Make sure the temperature is at least 50°F or 10°C. Thoroughly clean your emblem/badge with soapy water. DO NOT USE ALCOHOL as it may damage the factory finish. DRY installation only! Begin in a corner and LIGHTLY affix the decal. Allow the decal to lay into position. DO NOT PULL OR STRETCH the decal. If the decal is out of position gently lift and move. Once in place apply FIRM pressure to activate the adhesive. All Graphics feature "Air Release Channels". Any bubbles or air pockets are easily removed by simply working them to the edges. Allow 24 hours for adhesive to reach full strength. Allow 24 hours before washing the decals.
ALLOW 24 HOUR FOR ADHESIVE TO REACH FULL STRENGTH. Wash with soap and water to maintain appearance. Automated car washes are not recommended. They will not damage the decals, but brushes and high pressure sprays may lift exposed edges. It is recommended to replace the decals every 2-3 years to ensure clean removal.